Location & approach

By car

The campus of the Technical University of Dortmund is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

By public transport

The "Dortmund Universität" S-Bahn station is located directly on the North Campus. From there, the S-Bahn line S1 runs every 15 or 30 minutes to Dortmund main station and in the opposite direction to Düsseldorf main station via Bochum, Essen and Duisburg. In addition, the university can be reached by bus lines 445, 447 and 462. Timetable information can be found on the homepage of the Rhine-Ruhr Transport Association, and DSW21 also offer an interactive route network map.

The H-Bahn (Suspended monorail system)

The H-Bahn is one of the hallmarks of TU Dortmund University. There are two stations on North Campus. One (“Dortmund Universität S”) is directly located at the suburban train stop, which connects the university directly with the city of Dortmund and the rest of the Ruhr Area. Also from this station, there are connections to the “Technologiepark” and (via South Campus) Eichlinghofen. The other station is located at the dining hall at North Campus and offers a direct connection to South Campus every five minutes.

By plane

The AirportExpress is a fast and convenient means of transport from Dortmund Airport (DTM) to Dortmund Central Station, taking you there in little more than 20 minutes. From Dortmund Central Station, you can continue to the university campus by interurban railway (S-Bahn). A larger range of international flight connections is offered at Düsseldorf Airport (DUS), which is about 60 kilometres away and can be directly reached by S-Bahn from the university station.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Location & approach

By car

The campus of the Technical University of Dortmund is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

By public transport

The "Dortmund Universität" S-Bahn station is located directly on the North Campus. From there, the S-Bahn line S1 runs every 15 or 30 minutes to Dortmund main station and in the opposite direction to Düsseldorf main station via Bochum, Essen and Duisburg. In addition, the university can be reached by bus lines 445, 447 and 462. Timetable information can be found on the homepage of the Rhine-Ruhr Transport Association, and DSW21 also offer an interactive route network map.

The H-Bahn (Suspended monorail system)

The H-Bahn is one of the hallmarks of TU Dortmund University. There are two stations on North Campus. One (“Dortmund Universität S”) is directly located at the suburban train stop, which connects the university directly with the city of Dortmund and the rest of the Ruhr Area. Also from this station, there are connections to the “Technologiepark” and (via South Campus) Eichlinghofen. The other station is located at the dining hall at North Campus and offers a direct connection to South Campus every five minutes.

By plane

The AirportExpress is a fast and convenient means of transport from Dortmund Airport (DTM) to Dortmund Central Station, taking you there in little more than 20 minutes. From Dortmund Central Station, you can continue to the university campus by interurban railway (S-Bahn). A larger range of international flight connections is offered at Düsseldorf Airport (DUS), which is about 60 kilometres away and can be directly reached by S-Bahn from the university station.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

New publication in Sci

11/13/2022

Mikrofluidische Reaktoren

The publication "Validation of Easy Fabrication Methods for PDMS-Based Microfluidic (Bio) Reactors" was published in Sci.

The common method for producing casting molds for the fabrication of polydimethylsiloxane (PDMS) chips is standard photolithography. This technique offers high resolution from hundreds of nanometers to a few micrometers. However, this mold fabrication method is costly, time-consuming, and might require clean room facilities. Additionally, there is a need for non-micromechanics experts, who do not have specialized equipment to easily and quickly prototype chips themselves. Simple, so-called, makerspace technologies are increasingly being explored as alternatives that have potential to enable anyone to fabricate microfluidic structures. We therefore tested simple fabrication methods for a PDMS-based microfluidic device. On the one hand, channels were replicated from capillaries and tape. On the other hand, different mold fabrication methods, namely laser cutting, fused layer 3D printing, stereolithographic 3D printing, and computer numerical control (CNC) milling, were validated in terms of machine accuracy and tightness. Most of these methods are already known, but the incorporation and retention of particles with sizes in the micrometer range have been less investigated. We therefore tested two different types of particles, which are actually common carriers for the immobilization of enzymes, so that the resulting reactor could ultimately be used as a microfluidic bioreactor. Furthermore, CNC milling provide the most reliable casting mold fabrication method. After some optimization steps with regard to manufacturing settings and post-processing polishing, the chips were tested for the retention of two different particle types (spherical and non-spherical particles). In this way, we successfully tested the obtained PDMS-based microfluidic chips for their potential applicability as (bio)reactors with enzyme immobilization carrier beads.

See the full publication: